

The AURORA® system by Main Group for the production of footwear soles represents a technological solution focused on production efficiency, the use of low-environmental-impact materials and weight control in soles and technical footwear.
It represents a vision of a more responsible, efficient and innovative future, available through machines that integrate sustainability, quality, recyclability and advanced materials with extremely low weight and exceptional rebound properties.
Its two main versions, INFinity and SUPerior, address different molding and injection requirements:
It was developed for the production of soles using lightweight thermoplastic materials, with densities ranging from 0.15 to 0.2 g/cm³, and is available in two versions: SUPerior Soles and SUPerior Direct Injection onto Uppers.
It is designed to optimize continuous traditional injection processes for thermoplastics and lightweight compounds, focusing on maximum production flexibility and operational continuity.
Designed to process conventional thermoplastic materials (such as TPU, PVC, TR and expandable compounds).
It allows production volume and the number of stations to be adjusted according to the demands of the production line.
Repeatability and control: Maintains consistent injection parameters to reduce component rejection rates caused by temperature or pressure variations.
This is the high-end version designed for technical footwear, high-performance soles and direct injection onto uppers. The basic concept is to replace chemical blowing agents with physical blowing agents, such as nitrogen in a critical state or carbon dioxide. The physical microfoaming system allows polymers (such as E-TPU, EVA or polyurethane) to be injected and expanded uniformly with nitrogen.
It also produces ultralight structures with greater energy return (resilience) and elasticity, without using polluting chemical blowing agents.
This process facilitates injection onto knitted or synthetic uppers, while two-color or dual-density combinations can be processed in a single production cycle.
It can be integrated into high-productivity platforms, such as MAIN GROUP's Pragma equipment for safety, athletic and technical footwear.
The advantages offered by this system include greater process control, more environmentally friendly production without mold release agents or chemical additives, higher expansion ratios and lower densities in the finished product.

- AURORA® SUPerior Process
It is based on three consecutive stages:
Plasticization: 200°C – 150 bar
Mixing: 0.70% N2
Injection: High speed – Mold pressurization

- Additional advantages
Mechanical properties are adjustable: they can be selected to suit each specific application.

- Circularity and Recycling
Finally, the SUPerior process makes it possible to obtain a recyclable and sustainable product. The materials used are thermoplastic polymers, which can therefore be reprocessed without major difficulties.
In the in-line recycling test of these foams, with recycled content of up to 25%, no differences — either morphological or mechanical — were observed compared with foams manufactured using virgin material.


RELATED ARTICLE:
- AURORA®: MAIN GROUP’s breakthrough technology for sole injection
Participate with your content in SERMA.NET and in our printed edition.
It is the opportunity to reach your customers!
Write us! marketing@serma.net